1. Each time the brine corrosion test box test is completed, it is recommended to clean the equipment test tank (including: spray room, salt solution room, preheating water tank and sealed water tank) with clean water to keep the equipment clean;
2. In each test or at the end of the test, the solution of the standard measuring cup shall be drained and cleaned to avoid accumulation of salt solution crystals and affect the calculation of the settlement amount;
3. When cleaning the cabinet, please note: a. Protection of the sheath of the temperature sensor; b. Protection of the glass filter and the glass nozzle (do not use needles or any hard objects to clear the filter or nozzle).
Salt water corrosion test box precautions:
1. Please confirm the connection of the power supply before the equipment operates;
2. Confirm whether the gas supply system is normal;
3, confirm the automatic water supply system is normal.
4, corrosion test box exhaust hole inspection;
5. Confirm the sealing of the water tank;
6. When preparing salt solution, use analytical grade NaCl and distilled water or deionized water to make it ready for use;
7. After the end of each test of the corrosion test box, the power supply, gas source, and water source should be cut off to prevent the equipment from being in a live standby state for a long time.
Want to buy salt water corrosion test box to come to Dongguan Ai Si, Dongguan City, Ai Si has professional technical staff to help you solve the problem, and serve you wholeheartedly.
